Floorball

Testing » Tested products

Together with SP Swedish National Testing and Research Institute, ITC is a second body authorized by the International Floorball Federation (IFF - http://www.floorball.org) as a certification body to evaluate floorball equipment. The testing process is administratively completed by the issue of a certificate in the SP Swedish institute and by purchasing the certification markings (for more detailed information see the Guide for Clients below). ITC cooperates closely with the Czech Floorball Union (ČFBU), which represents Czech floorball at the international level.

Competences (PDF file)

SCOPE OF TESTING LABORATORY

demountable cushions
goals
floorball sticks
floorball balls
goalkeeper´s masks

TECHNICAL REGULATIONS

The requirements for floorball equipment, testing methods and certification procedures are described in the currently valid technical specifications “Material Regulations – Certification Rules for IFF-marking of Floorball Equipment SPCR 011 – Edition 2012” (MR) and its attachments. For general public, MR and its attachments are available at the official IFF website www.floorball.org

( http://www.floorball.org/default.asp?sivu=6&alasivu=41&kieli=826 )

Players and organizers of competitions are obliged to use only equipment bearing the IFF certification marking. This obligation is enshrined in the official IFF games rules (International Floorball Federation: Rules of the Game, Edition 2010), which are also available at the IFF website www.floorball.org.

( http://www.floorball.org/default.asp?sivu=6&alasivu=31&kieli=826 )

TESTING

ITC provides testing of samples and the necessary conformity assessment with the requirements of the Material Regulations exclusively in its own laboratories as the IFF rules do not allow the taking over of the results of other laboratories. The scope of testing for the particular types of equipment is specified in the following table together, indicating also the articles of the Material Regulations (MR) applicable to the respective type. ITC issues a Test Report in printed and CD-ROM version containing an evaluation of whether or not the tested product meets all the applicable requirements of the Material Regulations. The Test Report is always issued by ITC in Czech and English language. The report can also be issued in other languages upon agreement with ITC.

Product type	MR article	Tested characteristics
Floorball stick	2.1.1. 2.1.2. 2.1.3. 2.1.4. 2.1.5. 2.1.6. 2.1.7.	Stick design Stick weight Stick size Stick rigidity Impact resistance Blade curve Colour stains in the playing field caused by the blade
Ball	2.2.1. 2.2.2. 2.2.3. 2.2.4. 2.2.5. 2.2.6. 2.2.7.	Ball weight Ball size Roughness of the ball surface Number of holes Strength of the material and the joint Rebound capacity Ball marking
Goal and net	2.3.1. 2.3.3. 2.3.4. 2.3.5. 2.3.6. 2.3.7.	Goal size Goal weight Colour stains in the playing field surface by the support plates Strength of the suspension net Net mesh width Length of the suspension net
Boards	2.4.1. 2.4.2. 2.4.3. 2.4.4. 2.4.5. 2.4.6.	Board size Board rounding and curve Preciseness of board placement Board surface treatment Impact resistance Rebound capacity of the board
Goalkeeper’s mask	2.5.1. 2.5.2.	Mesh width of the face mask Impact test with a puck flying at 10 m/s

CERTIFICATION

A test report issued in ITC serves as an underlying document for the issue of a certificate by the SP Swedish National Testing and Research Institute, acting as a certification body. The certification procedure is described in the Client's Handbook or in “Material Regulations". Mr. Lennart Månsson is the contact person for these purposes.

CONTACTS

Person	Phone	fax	e-mail
Milan Borsky, technical expert	+420 577 601 298	+420 577 601 278	mborskyitczlin.cz
Lennart Månsson, Head of SP Certification	0046 33 165 000	0046 33 135 502	lennart.manssonsp.se

Post address:
Institute for Testing and Certification, Inc.
trida Tomase Bati 299, Louky, 763 02 Zlin
Czech Republic

The person responsible for accuracy of data: Milan Borsky, technical expert

Updated: 3.1.2018

Conformity assessment of personal protective equipment

Regulation (EU) 2016/425 on personal protective equipment - Guidance document on the implementation of Article 47

Testing of hydraulic brake hose assemblies by Standard SAE J1401

New method for determination of organometallic complexes

Determination of crack bridging properties